Gate Valve with Extended rod are essential components in piping systems. They are designed to control the flow of liquids, gases, or other materials in pipelines.  These valves can be used in various applications, such as water supply, sewage treatment, petrochemical, and power plants. The extension rod is an integral part of these valves, which allows for remote operation of the valve. The operation direction is generally clockwise for off and counterclockwise for on, qingdao fluido can also design the direction and mark the extension rods to your specifications.

The working principle of Gate Valve with Extended rod is simple. The valve is opened or closed by turning the handwheel at the top of the extension rod. The handwheel is connected to the valve stem, which moves the valve disk up or down to open or close the valve. The extension rod transmits the motion from the handwheel to the valve stem, allowing the valve to be operated remotely.

The length range of the extension stem is usually determined by the distance between the valve and the point where it needs to be operated. The length can vary from a few inches to several feet, depending on the application. If the extension stem is too short, it may be difficult to operate the valve, especially if it is located in a confined space. On the other hand, if the extension stem is too long, it may be more prone to bending or breaking, which can cause the valve to malfunction. Therefore, it is crucial to choose the right length range for the extension stem, you can contactqingdao fluido to choice.

Gate Valve with Extended rod Specification

Gate Valve with Extended rod photo

FLUIDO GATE VALVE TYPES